|
|
|
J & W Official Announcemen.. |
|
|
|
|
12/08/11 |
JW520 Series |
Plastic Injection Molding Machine - JW520 Series |
|
FEATURES: |
◆ With the superposition of servo motor Precision characterisitics and internal gear pump Precision characterisitics, and through high sensitivity of pressure feedback device closed-loop, the comparison of injection repeatability can be 3%.Compared to conventional hydraulic machine, servo machine shows greater stability of injection, increasing the forming percent of pass a lot. |
◆ Due to the high response servo motor with internal gear pump power system, it is only 0.05S to reach the maximum injection output. Compared to conventional hydraulic injection molding machine, the respond speed become faster, effectly shorten the cycle time and improve the production rate. | |
SPECIFICATIONS: |
|
JW520 |
JW650 |
JW780 |
|
|
|
|
|
|
|
|
D |
|
|
|
D |
Injection Unit |
|
|
|
|
Screw diameter |
mm |
75 |
84 |
90 |
80 |
90 |
100 |
110 |
90 |
100 |
110 |
120 |
Screw L/D ratio |
|
22.4 |
20 |
18.6 |
24.8 |
22 |
19.8 |
18 |
24.4 |
22 |
20 |
18.3 |
Shot Size (theoretical) |
cm(3) |
1930 |
2420 |
2780 |
2112 |
2673 |
3300 |
3993 |
2945 |
3636 |
4400 |
5236 |
Injection weight(ps) |
g |
1756 |
2200 |
2525 |
1920 |
2430 |
3003 |
3631 |
2680 |
3306 |
4003 |
4765 |
Injection pressure |
Mpa |
204 |
163 |
142 |
224 |
177 |
143 |
118 |
228 |
184 |
152 |
128 |
Ejector Stroke |
mm |
435 |
440 |
462 |
Screw speed |
r/min |
0~155 |
0~130 |
0~110 |
Clamping Unit |
|
|
Clamp tonnage |
KN |
5200 |
6500 |
7800 |
Toggle stroke |
mm |
730 |
900 |
1020 |
Space between tie bars |
mm |
800 x 800 |
900 x 900 |
980 x 980 |
Max. Mold height |
mm |
850 |
900 |
1000 |
Min. Mold height |
mm |
350 |
400 |
400 |
Ejector stroke |
mm |
200 |
260 |
260 |
Ejector tonnage |
KN |
150 |
175 |
186 |
Ejector number |
pc |
13 |
17 |
21 |
Others |
|
|
Max. pump pressure |
MPa |
16 |
16 |
16 |
Pump motor power |
kw |
45 |
30+30 |
37+37 |
Heater power |
kw |
25.9 |
46 |
58 |
Machine dimension(L x W x H) |
m |
8.1 x 2.0 x 3.0 |
9.9 x 2.5 x 3.8 |
11 x 2.6 x 3.8 |
Machine weight |
t |
22.5 |
36 |
46 |
Hopper capacity |
L |
- |
- |
- |
Oil tank capacity |
L |
1050 |
1480 |
1770 | |
SPECIFICATIONS: |
|
JW1080 |
JW1250 |
|
|
|
|
|
D |
|
|
|
|
Injection Unit |
|
|
|
Screw diameter |
mm |
100 |
110 |
120 |
130 |
110 |
120 |
130 |
140 |
Screw L/D ratio |
|
24.2 |
22 |
20.2 |
18.6 |
26.2 |
24 |
22.2 |
20.6 |
Shot Size (theoretical) |
cm(3) |
3818 |
4619 |
5500 |
6452 |
5545 |
6600 |
7745 |
8980 |
Injection weight(ps) |
g |
3475 |
4203 |
5005 |
5871 |
5045 |
6005 |
7045 |
8170 |
Injection pressure |
Mpa |
211 |
174 |
146 |
125 |
205 |
172 |
147 |
126 |
Ejector Stroke |
mm |
486 |
583 |
Screw speed |
r/min |
0~110 |
0~90 |
Clamping Unit |
|
|
Clamp tonnage |
KN |
10800 |
12500 |
Toggle stroke |
mm |
1200 |
1300 |
Space between tie bars |
mm |
1100 x 1100 |
1250 x 1250 |
Max. Mold height |
mm |
1200 |
1300 |
Min. Mold height |
mm |
550 |
550 |
Ejector stroke |
mm |
320 |
320 |
Ejector tonnage |
KN |
215 |
215 |
Ejector number |
pc |
21 |
21 |
Others |
|
|
Max. pump pressure |
MPa |
16 |
16 |
Pump motor power |
kw |
45+45 |
55+55 |
Heater power |
kw |
68 |
85 |
Machine dimension(L x W x H) |
m |
12 x 2.8 x 4.0 |
13.7 x 3.1 x 4.1 |
Machine weight |
t |
56 |
66 |
Hopper capacity |
L |
- |
- |
Oil tank capacity |
L |
2300 |
2400 |
| |
【Bookmark this page】【Big Mid Small】【return】 |
|
|