Lathe － GH1640W / GH1860W
FEATURES:
◆ Hardened and ground bed ways and "V" tailed slide of saddle.
◆ The spindle bore size is 80mm.
◆ One-piece cast iron base.
◆ Main driving gears are hardened and ground.
◆ Head stock is lubricated by means of pump and oil bath.
◆ Clutch furnished in apron is for over load of automatic feed.
◆ Removable gap bed for large diameter work.
◆ Easily cut screw and no need of changing gear.
◆ Five-position auto carriage stop.
◆ Foot brake gives rapid braking.
|
SPECIFICATIONS: |
GH1640W |
GH1860W |
STANDARD EQUIPMENT |
|
Swing Over Bed: |
410mm 16" |
460mm 18" |
◆ 10" 3 jaw chuck |
|
Swing Over Cross Slide: |
222mm 8.75" |
285mm 11.2" |
◆ 12" 4 jaw chuck |
|
Swing Over Gap: |
650mm 25.63" |
696mm 27.4" |
◆ Center MT-4 |
|
Distance Between Centers: |
1000 40" |
1500 60" |
◆ Center sleeve |
|
Hole Through spindle: |
80mm 3-1/8" |
◆ Pad |
|
Width of Bed: |
340mm 13.4" |
◆ Four way tool post |
|
Spindle Nose: |
D 1-8 |
◆ 16" Face plate |
|
Taper in Spindle Bore: |
MT-6 |
◆ Steady rest |
|
Number in Spindle Speeds: |
12 |
◆ Follow rest |
|
Range of Spindle Speeds: |
40~1600RPM |
|
|
Range of Spindle Feeds: |
0.0325~1.76mm(.0012"~.0672")/rev. |
OPTIONAL ACCESSORIES |
|
Range of Cross Feeds : |
0.014~0.736mm(.0005~.0288")/rev. |
◆ Quick change tool post |
|
Metric Threads: |
0.1-14mm (41 kinds) |
◆ Taper attachment |
|
Inch Threads: |
2-112TPI (60 kinds) |
◆ Digital readout device |
|
Diametral Threads: |
4-112DP (50 kinds) |
◆ Chuck guard & Lead screw cover |
|
Module Threads: |
0.1-7MP (34 kinds) |
|
|
Diameter of Leadscrew: |
36mm 1.41" |
|
|
Pitch Threads of Leadscrew: |
6mm 4T.P.I |
|
|
Maxium Cross Slide Travel: |
220mm 9" |
|
|
Maxium Compound Slide Travel: |
120mm 4-3/4" |
|
|
Tailstock Quill Travel: |
130mm 5" |
|
|
Diameter of Tailstock Quill: |
70mm 2-3/4" |
|
|
Taper in Tailstock Quill: |
MT-4 |
|
|
Power: |
7.5KW / 10HP |
|
|
Net Weight (approx): |
2200kg |
3130kg |
|
|
Gross Weight (approx): |
2400kg |
3330kg |
|
