CNC Horizontal Gear Shaping Machine - SCC5140J
|
|
|
FEATURES: |
|
◆ With an electronic guide,no helical guide is needed to cut helical gears. With a cutter head slide,the machine is easy to adjust and of a wider machining cappability. Cluster gears can be cut on one clamping position. |
|
◆ The cutter is clamped by a disk spring and released hydraulically. |
|
◆The stroke length of cutter can be adjusted automatically. |
|
◆ High rigidity of main body is ensured by the material of hige-density gray cast iron and the structure of double-wall and pipe-shaped design. |
|
◆Ceramet material is used for the ball joint of cutter head.
|
| ◆Big diameter of cutter spindle |
| ◆Ball screws of big diameter and high precision |
| ◆Static-pressure bearings and guides are used for cutter head. |
| ◆ A high-precision,dual-lead worm pair is used for the worktable. |
| ◆Cycle coolant system in the base of machine body ensures good thermal balance. | |
|
SPECIFICATIONS: |
SCC5140J |
| Max. Dia.tobe cut(external gear) |
400mm |
| Max.Dia to be cut (internal gear) |
250+dmm(Max.400) |
| Max.module to be cut |
8mm |
| Max.stroke length |
100mm |
| Max.face width to be cut |
85mm |
| Max.helix angle to be cut |
±35deg |
| Dia. of cutter spindle |
100mm |
| Travel length of cutter head slide |
200mm |
| Strokertate of spindle (stepless) |
80~800str/min |
| CNC system |
Siemens 840D |
| |
