Combination Lathe/Mill - DGN750H
|
FEATURES: |
◆ This machine is multi-purpose machine tool of bench type. |
◆ It is mainly used to lathe,drill and mill.Which is controled by two motor. |
◆ 360°rotation in vertical plane. |
◆ It can be realized in power feed on longitudinal or cross. | |
SPECIFICATIONS: |
DGN750H |
STANDARD EQUIPMENT |
|
300mm 12" |
◆ 6" 3 jaw chuck |
Swing Over Carriage: |
140mm 5.5" |
◆ 4 jaw chuck |
Distance Between Centers: |
750mm 29.5" |
◆ Change gear |
Spindle Bore: |
26mm 1" |
◆ Dead centers |
Taper of hole in Spindle Morse: |
M.T.4 |
◆ Allen wrench |
Max.Cross Travel Over Carrier: |
200mm 8" |
◆ Single open end wrench |
Max.Longitudinal Travel Over Carrier: |
80mm 3" |
◆ Drill chuck |
Spindle Speed Step: |
6 |
◆ Knock out wedge |
Spindle Speeds Range: |
160-1600RPM |
◆ Rocker |
Metric Thread Kinds on Processing: |
14 |
◆ Face plate |
Metric Thread Pitch on Processing: |
0.5-3mm 0.02"-0.12" |
◆ Steady Rest |
Inch Thread Kinds on Processing: |
20 |
◆ Follow Rest |
Inch Thread Pitch on Processing: |
11-40T.P.I. |
◆ Chuck backplate |
Max.Travel on Tailstock Barrel: |
50mm 2" |
◆ Threading dial |
Taper Hole of Tailstock Barrel Morse: |
M.T.3 |
◆ Four Way Tool Post |
Motor: |
550W 3/4HP |
OPTIONAL ACCESSORIES |
Max.Drilling Capacity : |
20mm 0.8" |
◆ Vice |
Distance From Bench to Spindle Nose: |
240-320mm 9.4"-12.6" |
◆ Face mill cutter |
Distance Between Spindle Center and the Surface of Column: |
310mm 12.2" |
◆ Machine footstand |
Milling-Drilling Headstock Vertical Travel: |
80mm 3.2". |
◆ Live Center |
Travel on Spindle Barrel: |
80mm 3.2" |
◆ Chuck guard & leadscrew cover |
Taper of Hole in Milling Spindle Morse: |
M.T.3 |
|
Spindle Speed Step: |
9 |
|
Spindle Speeds Range: |
315~2000RPM |
|
Bench Dimension : |
425x150mm 16.7"x6" |
|
Motor: |
550W 3/4HP |
|
Overall Dimensions: (LxWxH) |
1100 x 550 x740 mm |
43.3" x 21.7" x 29" | |
|
Net Weight: |
270KGS 594lbs |
|
|