Combination Lathe/Mill - DGN900H
|
|
|
FEATURES: |
|
◆ This machine is a multi-purpose machine tool of bench type. |
|
◆ It is mainly used to lathe,drill and mill,which is controlled by two motor. |
|
◆ Wider of work scope and power feed on longitudinal or crosswise. |
|
◆ 360°rotation in vertical plane. | |
|
SPECIFICATIONS: |
DGN900H |
STANDARD EQUIPMENT |
|
|
|
◆ 6" 3 jaw chuck |
|
Max.length of workpiece: |
|
◆ 8" 4 jaw chuck |
|
Swing diameter over tool carrier: |
|
◆ 8" face plate |
|
Spindle bore: |
38mm 1.5" |
◆ Dead centers |
|
Taper of hole in spindle morse: |
MT#5 |
◆ Wrenchs |
|
Max.longitudinal storke over tool carrier: |
80mm 3" |
◆ 1/2" Drill chuck |
|
Metric thread kinds on processing: |
12 |
◆ Knock out wedge |
|
Metric thread pitch on processing: |
0.5-3mm |
◆ Rocker |
|
Inch thread kinds on processing: |
20 |
◆ Machine stand |
|
Inch thread pitch on processing: |
11-40TPI |
◆ Change gear |
|
Max.stroke on taper hole: |
80mm 3" |
◆ Steady rest |
|
Taper of hole in tailstock: |
MT#3 |
◆ Follow rest |
|
Spindle speed scope: |
250-1600RPM |
◆ Threading dial |
|
Lathe motor size: |
1.1kw 220v single-phase |
◆ Four-way tool post |
|
Max.drilling capacity : |
15mm 0.6" |
OPTIONAL ACCESSORIES |
|
Distance from bench to spindle nose: |
250-380mm 10"-15" |
◆ Face mill cutter |
|
Distance between spindle center and the surface of column: |
400mm 15.5" |
◆ Live center |
|
Swivel-angle of the milling and drilling headstock around the column: |
360 |
◆ Machine vice |
|
Milling-drilling headstock vertical stroke: |
130mm 5" |
◆ Chuck guard & leadscrew cover |
|
Milling spindle speed step: |
9 |
|
|
Milling spindle speed scope: |
315-2000RPM |
|
|
Bench dimension : |
425x200mm 16.5"x7.5" |
|
|
Taper of hole in milling spindle morse: |
MT#3 |
|
|
Stroke on milling spindle hole: |
127mm 5" |
|
|
Mill/drill motor size: |
0.55kw 220v.single-phase |
|
|
Net weight : |
410kg 903lbs |
|
|
Overall dimension : |
|
1860x830x1110mm |
|
73.3"x32.7"x43.7" | |
|
| |
